Warmup DWM-18-120 Sticky Mat 120V 252W 3W X 6L 2.10 Amps Covers 18 Sq Ft

    391.00 391.00 391.0 CAD

    391.00

    This combination does not exist.

    Add to Cart Buy Now


    Warmup DWM-18-120 Sticky Mat 120V 252W 3W X 6L 2.10 Amps Covers 18 Sq Ft

    PRODUCT CODES
    DWM-sqft-voltage

    PRODUCT DESCRIPTION
    The Warmup StickyMat system is a series of small 3ft wide mats aimed for bathroom installations under tile & stone. It is specifically suitable for time-restricted environments such as residential multihousing and commercial units.

    StickyMats are a dual-adhesive with double sided tape as well as a pressure-sensitive adhesive on the entire mesh, allowing for a fast set-up. They can be combined and patch-worked into the room to customize the coverage. Each mat is built with a dual-conductor cable with a single power cord to connect to the thermostat.

    StickyMats are available in 3x3, 3x5, 3x6, 3x8 and 3x10ft.

    ADVANTAGES
    The thinnest dual-fluoropolymer coated heating wire (less than 1/8" diameter).
    StickyMat with pressure sensitive adhesive, for the fastest and most secure installation.
    Can be repositioned easily without losing adhesion.
    The pressure sensitive adhesive ensures that no wire or mesh is raised when tiling or covering with self-leveling compound.

    LIMITATIONS
    Do not cut the cable or apply the cable with staples. Apply caution to avoid nailing through the cable and avoid installation under permanent fixtures.
    The StickyMat is designed for primary heating provided the subfloor is properly insulated. Refer to Warmups WIB-Warmup Insulation Boards to provide additional insulation over uninsulated slabs on grade.

    SPECIFICATIONS
    Operating voltage 120V
    Width 3ft
    Cable thickness 1/8" (3mm)
    Inner / Outer Insulation Advanced fluoropolymer (ETFE)
    Output rating 14W/sq ft
    Coil tail length 10ft (3m)
    Approvals cULus

    Applications
    Suitable Floor Coverings
    Tile, Stone, Porcelain
    Vinyl and LVTs
    Glued-down carpet
    Glued-down wood

    Suitable Sub-Floor
    Plywood & OSB
    Polymer-modified leveler
    Concrete slab
    Cement boards
    Insulation Boards with cementitious coating

    Min. coverage 3/8" thinset or self-leveling compound
    Max. coverage 3/4" thinset or self-leveling compound

    Model Mat length (ft) Width Area (Sqft) Wattage Amps Resistance
    DWM-09-120 3.0 3.0 9 126 1.05 114.3
    DWM-15-120 5.0 3.0 15 210 1.75 68.5
    DWM-18-120 6.0 3.0 18 252 2.10 57.1
    DWM-24-120 8.0 3.0 24 336 2.80 42.9
    DWM-30-120 10.0 3.0 30 420 3.50 34.3

    Recently viewed Products