Steamist SMP-7 Steam Generator 7.5KW 208V 1PH

This product is no longer available.


Steamist SMP-7 Steam Generator 7.5KW 208V 1PH

Features
Limited lifetime warranty - 2-year in home labor warranty where available
Proportional Steam
Microprocessor based diagnostics and LED indication
Stainless Steel Tank Construction
Intelligent control communication
UL/CUL Listed

Required Equipment
TSC Control
Required Electrical Service
Dedicated circuit required: See Specification Chart for proper
electrical requirements
Product Information
Water Supply - " Compression Fitting, 120 PSI Max
Steam Outlet - " Brass NPT male thread
Pressure Relief Valve - " NPT female thread
Drain Outlet - Capped 1/2" Brass NPT male thread
Supplied with a 35 control cable
Generator
Weight - 30 lbs.

Installation Notes
For optimum performance, the steam generator should be mounted as close as possible to the steam room. If needed, the steam pipe may be up to 50 long.
Steam Generators should be accessible for service.
Do NOT install near flammable material such as paints, thinners, gasoline, etc.
Steam generators must NOT be installed outdoors, in moist, humid areas, in areas prone to freezing, or extreme heat such as an unventilated attic. To do so will void the warranty.
Steamhead to be mounted 12" to 18" above floor or 6" above rim of tub and as far from the seating area as possible.

Service Access
Minimum: 21" W x 18" D x 22" H (28" W with Auto Drain)

Product Number: SMP-7-208
KW Rating: 7.5
Max.Cu.Ft. Range: 250
Volts/Phase/Max.Amps: 208/1/36
Line Fuse: 50
Dimensions: 15" x 6" x 15.5"

Recently viewed Products