Schluter A125 Schiene Edge Trim 1/2" Alum

Schluter A125 Schiene Edge Trim 1/2" Alum

Schluter-SCHIENE
Finishing and edge-protection profile with minimum reveal

Schluter-SCHIENE provides effective and attractive edge protection for tile coverings that are typically bordered by carpet, at expansion joints, or as decorative edging for stairs. The profile offers a discreet, minimum reveal which is ideal for creating elegant transitions between floor coverings.
New! Now available in 10 (3.05 m) lengths
Prevents tiles from chipping
Ideal for creating transitions on floors
Ideal for floor installations, where tile is bordered by carpet or wood
Features an approximately 1/8" (3 mm)-wide visible surface for discreet transitions
Anchoring leg is available with a special radius perforation so that the profile can be used to form curves
87 slope to transfer point loads and protect tile edges
Available in stainless steel, solid brass, aluminum, and anodized aluminum

SCHIENE EDGE TRIM 1/2" ALUM
Product Code: A125

Schluter-SCHIENE is designed to provide edging for tile coverings. Typical applications include edge protection where tile is bordered by carpet, at expansion joints, or as a decorative edging for stairs.

SCHIENE is available in stainless steel, solid brass, aluminum, and anodized aluminum. The profile features a trapezoid perforated anchoring leg, which is secured in the mortar bond coat beneath the tile, and an 87 sloped vertical wall section that transfers point loads to the substrate and surface covering while protecting tile edges from damage. SCHIENE, in solid brass, aluminum, and anodized aluminum, features a 5 sloped top flange and fillet at the anchoring leg/vertical section interface to enhance edge protection by reducing stresses on the tile, and, in sizes greater than 1/4" (6 mm), features an integrated joint spacer that establishes a defined joint cavity between the tile and the profile.

The anchoring leg of SCHIENE, in all materials, is available with a special radius perforation R so that the profile can be used to form curves.


The Schluter-SCHIENE profile requires no special maintenance or care and is resistant to mold and fungi. Clean profiles periodically using neutral cleaning agents. Stainless steel surfaces exposed to the environment or aggressive substances should be cleaned periodically using a neutral cleaner. Regular cleaning maintains the neat appearance of stainless steel and reduces the risk of corrosion. Avoid the use of strong acids (e.g. hydrochloric or hydrofluoric) and base/alkaline cleaners (e.g. bleach, ammonia, chlorides). Do not use abrasive cleaning agents and tools. Stainless steel surfaces develop a sheen when treated with a chrome-polishing agent. Oxidation films on exposed solid brass or aluminum may be removed with a common polishing agent but will form again. In the case of chrome plated brass, anodized aluminum, and color coated aluminum and textured color-coated aluminum, do not use abrasive cleaning agents.