3M BREW110-MS Coffee Tea Water Filtration System
3M Purification Inc. Water Filtration Products ModelS BREW110-MS and BREW115-MS single cartridge water filtration systems help provide high quality water for the perfect cup of coffee or tea by reducing the effects of sediment and chlorine taste and odor at flow rates up to 1.0 gpm (3.8 lpm). A proprietary slow release scale inhibitor reduces the ability of calcium and magnesium to form on the heating coils causing downtime and unscheduled service maintenance.
BREW110-MS combines scale reduction with cyst, sediment and chlorine taste and odor reduction for up to 3,500 gallons (13,249 liters).
BREW115-MS combines scale reduction with sediment and chlorine taste and odor reduction from higher turbidity water for up to 3,500 gallons (13,249 liters).
3M Water Filtration Products BREW110-MS Coffee/Tea Water Filtration System is a High Flow Filter System designed for Coffee/Tea Brewers in the reduction of sediment, scale, cyst, chlorine, taste and odor. System includes a head assembly with integral mounting bracket and a single filter cartridge (HF10-MS, 56093-29). BREW110-MS has a patented Valve-In-Head design simultaneously shuts-off and vents water, allowing for simple and virtually trouble-free cartridge change-outs without the need to shut off the upstream feed water.
Sanitary Quick Change (SQC) encapsulated cartridge design reduces media contamination during change-outs.
Enhances water clarity and reduces sediment carry over.
Reduces scale built up and equpment down time.
Certified by NSF to standard 42&53
FDA CFR-21 Compliant Materials
Inlet/Outlet: 3/8" FNPT
Flow Rate: 1 gpm
Capacity: 3,500 gallons
Micron Rating: 0.5 micron (nominal)
Media Type: Carbon Block
Max Water Temp: 100 F
Max Water Pressure: 125 psi
System includes a head assembly with integral mounting bracket and a single cartridge filter.
Port for optional downstream pressure gauge in top of head assembly.
Inlet and outlet plumbing connections are 3/8" FNPT.
System incorporates an internal automatic 1/4 turn shut-off valve.
Filter cartridges are o-ring seal type.
System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100F (37.8C).
Recommended service flow rate is up to 1.0 gpm (3.8 lpm).
Filter cartridges incorporate carbon block filtration medium and scale inhibitor.
System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
Cartridges are sanitary in design, requiring no contact with the filter media during cartridge change-out.
Filter cartridges require no pre-activation.
NSF Performance Data Sheet (PDS) is included.