3M ICE160-S Ice Filtration System With Shut Off Valve
3M Water Filtration Products Models ICE160-S and ICE165-S single cartridge water filtration systems help provide consistent high quality water for commercial ice by reducing the effects of sediment, chlorine taste and odor and scale at fl ow rates up to 3.34 gpm (12.6 lpm). Built-in scale inhibition reduces the ability of calcium and magnesium to precipitate on the evaporator plates as hard scale.
ICE160-S combines chlorine taste and odor reduction with cyst, bacteria1 and sediment reduction, while reducing the effects of chlorine corrosion and scale for up to 35,000 gallons (132,489 liters).
ICE165-S combines chlorine taste and odor reduction with sediment reduction from higher turbidity water, while reducing the effects of chlorine corrosion and scale for up to 35,000 gallons (132,489 liters).
The3M ICE160-S is a single-cartridge water filter system that removes cysts and the unpleasant taste & odor of chlorine apart from filtering out sediments. The 3M ICE160-S filter system provides protection against the harmful effects of chlorine-induced corrosion. This filter also prevents scaling associated with hard water, ensuring your pipes and plumbing connections last for a longer period. The system includes a head assembly with an integral mounting bracket, pressure gauge, and a single cartridge filter. Revolutionary IMPACTechnology dual zone media cartridge construction combines a membrane in series with premium activated carbon to provide unsurpassed throughput and cartridge life.
Certified by NSF Standard 42 and 53 for cyst reduction
Built-in scale inhibitor reduces lime scale build-up on evaporator plates.
Built-in bacteria inhibitor intended to reduce fouling of media
Sanitary Quick Change encapsulated filter design that makes filter change outs very simple and quick
For Low Flow Cubers to 1,450 lbs, High Flow Cubers to 1,000 lbs, or Flakers to 2,400 lbs
System includes a head assembly with pressure gauge, inlet water shut-off valve assembly, mounting bracket and a single cartridge filter.
Inlet and outlet plumbing connections are 1/2" FNPT.
Filter cartridges are o-ring seal type.
System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100F (37.8C).
Recommended service fl ow rate is up to 3.34 gpm (12.6 lpm).
Filter cartridges incorporate a bacteriostatic carbon block fi ltration medium (HF60-S replacement cartridge) and scale inhibitor.
System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
Cartridges are sanitary in design, requiring no contact with the fi lter media during cartridge change-out.
Filter cartridges require no pre-activation.
NSF Performance Data Sheet (PDS) is included.
Shipping weight: 4.1 lbs. (1.9 kg) per case.
Operating weight: 7.5 lbs. (3.4 kg) per case.
Case quantity: 1.
Inlet/Outlet 3/8" FNPT
Flow Rate: 3.34 gpm
Micron Rating: 0.2 micron (nominal)
Media Type: Carbon Block w/Phosphate
Max Water Temp: 100 F
Max Water Pressure: 125 psi
Filter Capacity: 35,000 gallons