3M BEV160 Cold Beverage Filtration System

    391.61 391.61 391.61 CAD


    This combination does not exist.

    Add to Cart Buy Now

    3M BEV160 Cold Beverage Filtration System

    3M Purification Inc. Water Filtration Products Models BEV160 and BEV165 single cartridge water filtration systems help to improve the taste, appearance and consistency of your beverages at flow rates up to 3.34 gpm (12.6 lpm).

    BEV160 combines cyst and bacteria1 reduction with sediment and chlorine taste and odor reduction for up to 35,000 gallons (132,489 liters).

    BEV165 combines sediment reduction from higher turbidity water with chlorine taste and odor reduction for up to 35,000 gallons (132,489 liters).

    The 3M Water Filtration Products BEV160 Cold Beverage Filtration System is a Revolutionary Integrated Membrane Pre-Activated Carbon Technology (IMPACT) dual-zone media cartridge construction combines a membrane in series with premium activated carbon to provide superior throughput and cartridge life. The 3M BEV160 System includes a pressure gauge and inlet shut-off valve for simple installation and operation, for Dual Carbonator Dispensers under high turbidity water conditions. Reduction of sediment and abrasive hard particles helps prevent equipment wear and helps extend the life of pumps, valves, o-rings and seals. Reduction claims: Bacteria, bacteriostatic, sediment, chlorine, taste & odor, cyst.

    Applications: Fountain Beverage Systems
    Replacement Cartridges (3M HF60)
    Certified to NSF/ANSI Standard 42 and 53
    FDA CFR-21 compliant materials
    Sanitary Quick Change (SQC) encapsulated cartridge design allows for fast and easy cartridge change-outs with a quarter turn

    Inlet/Outlet: 1/2" FNPT
    Height: 17-5/8"
    Diameter: 8"
    Flow Rate: 3.34 gpm
    Capacity: 35,000 gallons
    Micron Rating: 0.2 micron (nominal)
    Media Type: Carbon Block
    Max Water Temp: 100 F
    Max Water Pressure: 125 psi

    System includes a head assembly with pressure gauge, inlet water shut-off valve assembly, mounting bracket and a single cartridge filter.
    Inlet and outlet plumbing connections are 1/2" FNPT.
    Filter cartridges are o-ring seal type.
    System maximum operating pressure of 125 psi (862 kPa) and operating temperature of 100F (37.8C).
    Recommended service flow rate is up to 3.34 gpm (12.6 lpm).
    Filter cartridges incorporate a bacteriostatic carbon block filtration medium (HF60 replacement cartridge).
    System materials are NSF Standard 42 and/or FDA CFR-21 compliant.
    Cartridges are sanitary in design, requiring no contact with the filter media during cartridge change-out.
    Filter cartridges require no pre-activation.
    NSF Performance Data Sheet (PDS) is included.

    Recently viewed Products