Warmup DWM-240-3080 Mat 240V 3080W 20 W X 134L 12.8 Amps Covers 220 Sq Ft

    2,519.00 2,519.00 2519.0 CAD

    2,519.00

    This combination does not exist.

    Add to Cart Buy Now


    Warmup DWM-240-3080 Mat 240V 3080W 20 W X 134L 12.8 Amps Covers 220 Sq Ft

    PRODUCT CODES
    DWM-XXX-XXX // DWM-voltage-wattage

    PRODUCT DESCRIPTION
    The NADWM floor heating mats are comprised of a low-profile twin conductor cable applied to a sturdy fiberglass mesh. The mats are self-adhesive on both sides and allow freedom of design and speed of installation thanks to the pre-spaced format of the heating cable.

    ADVANTAGES
    The NADWM mats have been specifically designed to provide Primary Heating under a variety of floors. The cable has been preassembled onto the mat to allow for an easy tape-down installation. At 132F peak cable temperature, the NADWM system heats up fast and has been tested and proven to provide 70F ambient temperature at 4ft in height in 1 hour.

    The NADWM mats come with double-sided tape on both sides for a flexible installation over all subfloors. Warmups StickyMAT range also provides for a pressure-sensitive adhesive on the mesh to ensure a very low installation profile.

    Using the 4iE Programmable Thermostat, the product can be programmed to suit the users needs. The 4iE monitors the systems power usage and will optimize comfort and consumption costs. The 4iE controller combines the efficiency of built in floor and room
    sensors.

    The cable on the NADWM mats is insulated with ETFE advanced fluoropolymers both on the conductors and the outer jacket for maximum protection. The system is fully grounded with a 10ft lead cable for connection to power.

    LIMITATIONS
    Do not cut the cable or apply the cable with staples. Apply caution to avoid nailing through the cable and avoid installation under permanent fixtures.

    The NADWM mat is designed for primary heating provided the subfloor is properly insulated. Refer to Warmups Warmup Insulation Boards (WIB) to provide additional insulation over uninsulated slabs on grade.

    SPECIFICATIONS
    Operating voltage 120V, 208V & 240V; 50/60Hz
    Width 20" (500mm)
    Mat thickness 1/8" (3mm)
    Inner / Outer Insulation Advanced fluoropolymer (ETFE)
    Output rating 14W/sq ft
    Coil tail length 10ft (3m)
    Approvals cULus

    Applications
    Suitable Floor Coverings
    Tile, Stone, Porcelain
    Vinyl and LVTs
    Glued-down carpet
    Glued-down wood

    Suitable Sub-Floor
    Plywood & OSB
    Polymer-modified leveler
    Concrete slab
    Cement boards
    Insulation Boards with cementitious coating
    Min. coverage 3/8" thinset or self-leveling compound
    Max. coverage 3/4" thinset or self-leveling compound

    Area (ft2) Code Mat Length (ft) (20" wide) Wattage (W) Amps (A) Resistance ()
    10 DWM-120-140 6 140 1.2 102.8
    15 DWM-120-210 9 210 1.8 68.5
    20 DWM-120-280 12 280 2.3 51.4
    25 DWM-120-350 15 350 2.9 41.2
    30 DWM-120-420 18 420 3.5 34.3
    40 DWM-120-560 24 560 4.7 25.7
    50 DWM-120-700 30 700 5.8 20.6
    60 DWM-120-840 37 840 7.0 17.1
    75 DWM-120-1050 46 1050 8.8 13.7
    90 DWM-120-1260 55 1260 10.5 11.4
    110 DWM-120-1540 67 1540 12.8 9.4
    120 DWM-120-1620 73 1620 13.5 8.9
    25 DWM-240-350 15 350 1.5 164.6
    40 DWM-240-560 24 560 2.3 102.9
    50 DWM-240-700 30 700 2.9 82.3
    75 DWM-240-1050 46 1050 4.4 54.9
    90 DWM-240-1260 55 1260 5.3 45.7
    110 DWM-240-1540 67 1540 6.4 37.4
    150 DWM-240-2100 91 2100 8.8 27.4
    180 DWM-240-2520 110 2520 10.5 22.9
    220 DWM-240-3080 134 3080 12.8 18.7
    240 DWM-240-3240 146 3240 13.5 17.8

    Recently viewed Products